6 Comments Add yours

1. Matt says:

   February 26, 2014 at 1:40 am

   Hi,
   I stumbled across this in a frantic bid to find info for a 66 4-door I’m building here in Perth, Western Australia. Where did you get the front spindle for disc brakes? Galaxies weren’t particularly common here in Aus but can’t wait to get her running!
   Keep it up mate.
   Cheers
   Matt

   LikeLike

   Reply
   1. 66ltd says:

      February 26, 2014 at 6:26 am

      Hey Matt,

      Its good to see someone down there with interest in the Galaxie. The front spindle is actually the stock drum brake spindle. I just bought a kit from Kore3. He fabricates custom hubs to fit the corvette brakes. You can use the spindles from on a late 70’s Ranchero, T-bird and a few others that will bolt right up for a cheaper route

      http://www.kore3.com/

      LikeLike

      Reply
      1. Austin Walker says:

         November 6, 2016 at 10:05 pm

         so you did have to get custom hubs from kore3 to fit his breaks set up

         LikeLike

      2. 66ltd says:

         November 7, 2016 at 5:17 am

         Hey Austin,

         Yes, I purchased the custom hubs from kore3 to fit the brake set up. Still waiting on Hotchkis to roll out their tubular front control arms (they said end of November). Then I’ll be able to start assembling the front end

         LikeLike

2. Aaron says:

   January 21, 2013 at 12:32 pm

   The kore kit is not on their website. Do you just have to call?

   LikeLike

   Reply
   1. 66ltd says:

      January 21, 2013 at 12:38 pm

      Yes, you need to call him. Very easy to work with

      LikeLike

      Reply